From Locked Up RC
Our 1.9″ Stator bead lock rings have a unique stepped cog design.
This look may be a first and also work as a side biteer in tight circumstances.
Made of high quality aluminum this ring is drilled to match the Axial 1.9″ bead lock ring mounting pattern.
This version gets a Hand Finish then is anodized Fossil Gray by Bateman’s Custom Coatings.
Because these might be a limited edition due to Batemans closing… get them while you can!
What’s included:
- 1x 1.9″ Stator bead lock ring with Fossil Gray Anodized finish
Dimensions:
Bead Diameter – 1.9″
Width – 3mm”
Weight – .25oz
Our Easy Mount® wheel system only uses 6 screws to hold the ring to the wheel, making your life much easier when working with foams and weights. An additional 18 screws thread into the ring and slide into larger holes in our Easy Mount® wheels. For the screws that hold the ring, we suggest M2x7 (or even M2x8). The remaining screws can be shorter or M2x8.
If you do not have our Easy Mount® wheels you can still use our Easy Mount® rings by using 18 of our M2x1 screws to thread into the ring.
If you have M2 hardware that you like, you can simply cut it flush to the back of the ring. This is what we did for all of our installation.
Hardware is not included
#169fossilgrayH – $8.00
Visit LockedUpRC.com
View more posts on Locked Up RC
The post Locked Up RC 1.9″ Stator Fossil Gray Bead Lock Rings appeared first on RC Car Action.
